Full Boulder
The full boulder will make up the majority of most walls. This tapered unit is a benefit when building curved walls since it allows the turning of a radius in shorter distances and with no cutting.

Full Corner Boulder
The Full Corner Boulder features a 90-degree corner and a third textured face at one end of the unit. The front face is identical to the Full Boulder. It is easily flipped upside down to form both left and right finished ends. This is a nice finish to the end of any wall.

48 x 18 x 42 (40”)     Weight: 2150 lbs.     Sq. Ft. / Block: 6 sq. ft.

*this unit also available in 24” depth

2/3 Corner Boulder
The 2/3 Corner is similar to the Full Corner with the exception of its 32” front face. When constructing a vertical partition wall with a 2/3 staggered bond, use a 2/3 Corner on the return course and in conjunction with a 1/2 Corner at the other end.

1/2 Corner Boulder
The 1/2 Corner is similar to the Full Corner with the exception of its 24” front face, For retaining walls, use this unit to begin the second course. The result is a perfect half-stagger of the vertical joints. This is a nice finish to the end of any wall.

24 x 18 x 42 (16”)     Weight: 900 lbs.     Sq. Ft. / Block: 34 sq. ft.

Cap Boulder
The Cap unit is the perfect finish for a top course. Its front face is identical to the Full Boulder so the Cap Boulder maintains continuity on the wall’s front side. However, the back side of the boulder is recessed 8” to allow for the application of soil and sod.

48 x 18 x 42 (32”)     Weight:1425 lbs.     Sq. Ft. / Block: 6 sq. ft.

*this unit also available as cap corner.